1950 Peugeot 203 vs. 2010 SsangYong Stavic

To start off, 2010 SsangYong Stavic is newer by 60 year(s). Which means there will be less support and parts availability for 1950 Peugeot 203. In addition, the cost of maintenance, including insurance, on 1950 Peugeot 203 would be higher. At 3,199 cc (6 cylinders), 2010 SsangYong Stavic is equipped with a bigger engine. In terms of performance, 2010 SsangYong Stavic (217 HP) has 173 more horse power than 1950 Peugeot 203. (44 HP) In normal driving conditions, 2010 SsangYong Stavic should accelerate faster than 1950 Peugeot 203. With that said, vehicle weight also plays an important factor in acceleration. 2010 SsangYong Stavic weights approximately 1110 kg more than 1950 Peugeot 203. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2010 SsangYong Stavic is four wheel drive (4WD), it will have significant more traction and grip than 1950 Peugeot 203. In wet, icy, snow, or gravel driving conditions, 2010 SsangYong Stavic will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 SsangYong Stavic (312 Nm @ 4600 RPM) has 232 more torque (in Nm) than 1950 Peugeot 203. (80 Nm @ 2500 RPM). This means 2010 SsangYong Stavic will have an easier job in driving up hills or pulling heavy equipment than 1950 Peugeot 203. 2010 SsangYong Stavic has automatic transmission and 1950 Peugeot 203 has manual transmission. 1950 Peugeot 203 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 SsangYong Stavic will be easier to drive especially in heavy traffic.

Compare all specifications:

1950 Peugeot 203 2010 SsangYong Stavic
Make Peugeot SsangYong
Model 203 Stavic
Year Released 1950 2010
Engine Position Front Front
Engine Size 1290 cc 3199 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 44 HP 217 HP
Torque 80 Nm 312 Nm
Torque RPM 2500 RPM 4600 RPM
Engine Bore Size 78 mm 89.9 mm
Engine Stroke Size 71 mm 84 mm
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 7 seats
Number of Doors 3 doors 5 doors
Vehicle Weight 924 kg 2034 kg
Vehicle Length 4360 mm 5130 mm
Vehicle Width 1610 mm 1830 mm
Vehicle Height 1510 mm 1920 mm
Wheelbase Size 2590 mm 3010 mm
Fuel Tank Capacity 50 L 80 L