1955 Mercedes-Benz 300 vs. 2012 Seat Altea
To start off, 2012 Seat Altea is newer by 57 year(s). Which means there will be less support and parts availability for 1955 Mercedes-Benz 300. In addition, the cost of maintenance, including insurance, on 1955 Mercedes-Benz 300 would be higher. At 2,996 cc (6 cylinders), 1955 Mercedes-Benz 300 is equipped with a bigger engine. In terms of performance, 1955 Mercedes-Benz 300 (215 HP @ 5800 RPM) has 67 more horse power than 2012 Seat Altea. (148 HP @ 6000 RPM). In normal driving conditions, 1955 Mercedes-Benz 300 should accelerate faster than 2012 Seat Altea. With that said, vehicle weight also plays an important factor in acceleration. 1955 Mercedes-Benz 300 weights approximately 101 kg more than 2012 Seat Altea. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1955 Mercedes-Benz 300 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1955 Mercedes-Benz 300. However, in wet, icy, snow, or gravel driving conditions, 2012 Seat Altea, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1955 Mercedes-Benz 300 (275 Nm @ 4600 RPM) has 75 more torque (in Nm) than 2012 Seat Altea. (200 Nm @ 3500 RPM). This means 1955 Mercedes-Benz 300 will have an easier job in driving up hills or pulling heavy equipment than 2012 Seat Altea. 2012 Seat Altea has automatic transmission and 1955 Mercedes-Benz 300 has manual transmission. 1955 Mercedes-Benz 300 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Seat Altea will be easier to drive especially in heavy traffic.
Compare all specifications:
| 1955 Mercedes-Benz 300 | 2012 Seat Altea | |
| Make | Mercedes-Benz | Seat |
| Model | 300 | Altea |
| Year Released | 1955 | 2012 |
| Engine Position | Front | Front |
| Engine Size | 2996 cc | 1984 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 215 HP | 148 HP |
| Engine RPM | 5800 RPM | 6000 RPM |
| Torque | 275 Nm | 200 Nm |
| Torque RPM | 4600 RPM | 3500 RPM |
| Engine Bore Size | 85 mm | 82.5 mm |
| Engine Stroke Size | 88 mm | 92.8 mm |
| Engine Compression Ratio | 8.6:1 | 10.5:1 |
| Top Speed | 217 km/hour | 203 km/hour |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Automatic |
| Number of Seats | 2 seats | 5 seats |
| Number of Doors | 2 doors | 5 doors |
| Vehicle Weight | 1293 kg | 1192 kg |
| Vehicle Length | 4530 mm | 4290 mm |
| Vehicle Width | 1800 mm | 1770 mm |
| Vehicle Height | 1310 mm | 1570 mm |
| Wheelbase Size | 2410 mm | 2470 mm |
| Fuel Tank Capacity | 100 L | 55 L |
