1958 Abarth 600 vs. 1966 Chrysler New Yorker

To start off, 1966 Chrysler New Yorker is newer by 8 year(s). Which means there will be less support and parts availability for 1958 Abarth 600. In addition, the cost of maintenance, including insurance, on 1958 Abarth 600 would be higher. At 7,206 cc (8 cylinders), 1966 Chrysler New Yorker is equipped with a bigger engine. In terms of performance, 1966 Chrysler New Yorker (185 HP @ 3600 RPM) has 144 more horse power than 1958 Abarth 600. (41 HP @ 5500 RPM) In normal driving conditions, 1966 Chrysler New Yorker should accelerate faster than 1958 Abarth 600. With that said, vehicle weight also plays an important factor in acceleration. 1966 Chrysler New Yorker weights approximately 1578 kg more than 1958 Abarth 600. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Chrysler New Yorker (420 Nm @ 2400 RPM) has 366 more torque (in Nm) than 1958 Abarth 600. (54 Nm @ 4000 RPM). This means 1966 Chrysler New Yorker will have an easier job in driving up hills or pulling heavy equipment than 1958 Abarth 600. 1966 Chrysler New Yorker has automatic transmission and 1958 Abarth 600 has manual transmission. 1958 Abarth 600 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1966 Chrysler New Yorker will be easier to drive especially in heavy traffic.

Compare all specifications:

1958 Abarth 600 1966 Chrysler New Yorker
Make Abarth Chrysler
Model 600 New Yorker
Year Released 1958 1966
Engine Position Rear Front
Engine Size 747 cc 7206 cc
Engine Cylinders 4 cylinders 8 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 2 valves
Horse Power 41 HP 185 HP
Engine RPM 5500 RPM 3600 RPM
Torque 54 Nm 420 Nm
Torque RPM 4000 RPM 2400 RPM
Engine Bore Size 61 mm 109.7 mm
Engine Stroke Size 64 mm 95.3 mm
Engine Compression Ratio 9.0:1 8.2:1
Drive Type Rear Rear
Transmission Type Manual Automatic
Number of Seats 2 seats 5 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 585 kg 2163 kg
Vehicle Length 3300 mm 5870 mm
Vehicle Width 1390 mm 2030 mm
Vehicle Height 1410 mm 1390 mm
Wheelbase Size 2010 mm 3160 mm