1958 Austin A 35 vs. 1976 Toyota Corona
To start off, 1976 Toyota Corona is newer by 18 year(s). Which means there will be less support and parts availability for 1958 Austin A 35. In addition, the cost of maintenance, including insurance, on 1958 Austin A 35 would be higher. At 1,587 cc (4 cylinders), 1976 Toyota Corona is equipped with a bigger engine. In terms of performance, 1976 Toyota Corona (84 HP @ 5600 RPM) has 50 more horse power than 1958 Austin A 35. (34 HP @ 4750 RPM) In normal driving conditions, 1976 Toyota Corona should accelerate faster than 1958 Austin A 35. With that said, vehicle weight also plays an important factor in acceleration. 1976 Toyota Corona weights approximately 310 kg more than 1958 Austin A 35. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 1976 Toyota Corona (135 Nm @ 3400 RPM) has 67 more torque (in Nm) than 1958 Austin A 35. (68 Nm @ 2000 RPM). This means 1976 Toyota Corona will have an easier job in driving up hills or pulling heavy equipment than 1958 Austin A 35.
Compare all specifications:
1958 Austin A 35 | 1976 Toyota Corona | |
Make | Austin | Toyota |
Model | A 35 | Corona |
Year Released | 1958 | 1976 |
Engine Position | Front | Front |
Engine Size | 948 cc | 1587 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 34 HP | 84 HP |
Engine RPM | 4750 RPM | 5600 RPM |
Torque | 68 Nm | 135 Nm |
Torque RPM | 2000 RPM | 3400 RPM |
Engine Bore Size | 62.9 mm | 81 mm |
Engine Stroke Size | 76.2 mm | 77 mm |
Engine Compression Ratio | 8.3:1 | 9.5:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 5 seats | 5 seats |
Vehicle Weight | 690 kg | 1000 kg |
Vehicle Length | 3470 mm | 4260 mm |
Vehicle Width | 1410 mm | 1620 mm |
Vehicle Height | 1490 mm | 1400 mm |
Wheelbase Size | 2030 mm | 2510 mm |