1959 Holden FE vs. 1956 MG MGA
To start off, 1959 Holden FE is newer by 3 year(s). Which means there will be less support and parts availability for 1956 MG MGA. In addition, the cost of maintenance, including insurance, on 1956 MG MGA would be higher. At 2,166 cc (6 cylinders), 1959 Holden FE is equipped with a bigger engine. In terms of performance, 1956 MG MGA (71 HP @ 5500 RPM) has 11 more horse power than 1959 Holden FE. (60 HP @ 4000 RPM) In normal driving conditions, 1956 MG MGA should accelerate faster than 1959 Holden FE. With that said, vehicle weight also plays an important factor in acceleration. 1959 Holden FE weights approximately 80 kg more than 1956 MG MGA.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1959 Holden FE (150 Nm @ 1200 RPM) has 46 more torque (in Nm) than 1956 MG MGA. (104 Nm @ 3500 RPM). This means 1959 Holden FE will have an easier job in driving up hills or pulling heavy equipment than 1956 MG MGA.
Compare all specifications:
| 1959 Holden FE | 1956 MG MGA | |
| Make | Holden | MG |
| Model | FE | MGA |
| Year Released | 1959 | 1956 |
| Body Type | Sedan | Convertible |
| Engine Position | Front | Front |
| Engine Size | 2166 cc | 1489 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 2 valves |
| Horse Power | 60 HP | 71 HP |
| Engine RPM | 4000 RPM | 5500 RPM |
| Torque | 150 Nm | 104 Nm |
| Torque RPM | 1200 RPM | 3500 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Rear |
| Transmission Type | Manual | Manual |
| Vehicle Weight | 980 kg | 900 kg |
| Vehicle Length | 4480 mm | 3970 mm |
| Vehicle Width | 1710 mm | 1460 mm |
| Vehicle Height | 1560 mm | 1280 mm |
| Wheelbase Size | 2670 mm | 2390 mm |
