1962 Lancia Appia vs. 2013 Mazda CX-09

To start off, 2013 Mazda CX-09 is newer by 51 year(s). Which means there will be less support and parts availability for 1962 Lancia Appia. In addition, the cost of maintenance, including insurance, on 1962 Lancia Appia would be higher. At 3,726 cc (6 cylinders), 2013 Mazda CX-09 is equipped with a bigger engine. In terms of performance, 2013 Mazda CX-09 (269 HP @ 6250 RPM) has 222 more horse power than 1962 Lancia Appia. (47 HP @ 4800 RPM) In normal driving conditions, 2013 Mazda CX-09 should accelerate faster than 1962 Lancia Appia. With that said, vehicle weight also plays an important factor in acceleration. 2013 Mazda CX-09 weights approximately 1162 kg more than 1962 Lancia Appia. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2013 Mazda CX-09 is all wheel drive (AWD), it will have significant more traction and grip than 1962 Lancia Appia. In wet, icy, snow, or gravel driving conditions, 2013 Mazda CX-09 will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Mazda CX-09 (366 Nm @ 4250 RPM) has 289 more torque (in Nm) than 1962 Lancia Appia. (77 Nm @ 3000 RPM). This means 2013 Mazda CX-09 will have an easier job in driving up hills or pulling heavy equipment than 1962 Lancia Appia. 2013 Mazda CX-09 has automatic transmission and 1962 Lancia Appia has manual transmission. 1962 Lancia Appia will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Mazda CX-09 will be easier to drive especially in heavy traffic.

Compare all specifications:

1962 Lancia Appia 2013 Mazda CX-09
Make Lancia Mazda
Model Appia CX-09
Year Released 1962 2013
Engine Position Front Front
Engine Size 1089 cc 3726 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 47 HP 269 HP
Engine RPM 4800 RPM 6250 RPM
Torque 77 Nm 366 Nm
Torque RPM 3000 RPM 4250 RPM
Engine Bore Size 68 mm 95 mm
Engine Stroke Size 75 mm 86 mm
Engine Compression Ratio 8.0:1 10.3:1
Fuel Type Gasoline Gasoline
Drive Type Rear AWD
Transmission Type Manual 6-speed automatic
Number of Seats 5 seats 7 seats
Vehicle Weight 900 kg 2062 kg
Vehicle Length 4020 mm 5108 mm
Vehicle Width 1490 mm 1936 mm
Vehicle Height 1410 mm 1728 mm
Wheelbase Size 2520 mm 2875 mm
Fuel Tank Capacity 37 L 76 L