1964 Jaguar MK 10 vs. 2010 Ford Bantam

To start off, 2010 Ford Bantam is newer by 46 year(s). Which means there will be less support and parts availability for 1964 Jaguar MK 10. In addition, the cost of maintenance, including insurance, on 1964 Jaguar MK 10 would be higher. At 4,235 cc (6 cylinders), 1964 Jaguar MK 10 is equipped with a bigger engine. In terms of performance, 1964 Jaguar MK 10 (265 HP) has 191 more horse power than 2010 Ford Bantam. (74 HP). In normal driving conditions, 1964 Jaguar MK 10 should accelerate faster than 2010 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1964 Jaguar MK 10 weights approximately 863 kg more than 2010 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1964 Jaguar MK 10 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1964 Jaguar MK 10. However, in wet, icy, snow, or gravel driving conditions, 2010 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1964 Jaguar MK 10 (385 Nm @ 4000 RPM) has 275 more torque (in Nm) than 2010 Ford Bantam. (110 Nm @ 3000 RPM). This means 1964 Jaguar MK 10 will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Bantam. 1964 Jaguar MK 10 has automatic transmission and 2010 Ford Bantam has manual transmission. 2010 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1964 Jaguar MK 10 will be easier to drive especially in heavy traffic.

Compare all specifications:

1964 Jaguar MK 10 2010 Ford Bantam
Make Jaguar Ford
Model MK 10 Bantam
Year Released 1964 2010
Engine Position Front Front
Engine Size 4235 cc 1295 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 265 HP 74 HP
Torque 385 Nm 110 Nm
Torque RPM 4000 RPM 3000 RPM
Engine Compression Ratio 9.0:1 10.2:1
Top Speed 191 km/hour 158 km/hour
Drive Type Rear Front
Transmission Type Automatic Manual
Number of Seats 5 seats 2 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1883 kg 1020 kg
Vehicle Length 5140 mm 4280 mm
Vehicle Width 1940 mm 1470 mm
Vehicle Height 1400 mm 1640 mm
Wheelbase Size 3050 mm 2670 mm
Fuel Tank Capacity 90 L 54 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]