1966 Alvis TF vs. 2010 Mazda 3

To start off, 2010 Mazda 3 is newer by 44 year(s). Which means there will be less support and parts availability for 1966 Alvis TF. In addition, the cost of maintenance, including insurance, on 1966 Alvis TF would be higher. At 2,993 cc (6 cylinders), 1966 Alvis TF is equipped with a bigger engine. In terms of performance, 2010 Mazda 3 (167 HP @ 6000 RPM) has 17 more horse power than 1966 Alvis TF. (150 HP @ 4750 RPM) In normal driving conditions, 2010 Mazda 3 should accelerate faster than 1966 Alvis TF.

Because 1966 Alvis TF is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1966 Alvis TF. However, in wet, icy, snow, or gravel driving conditions, 2010 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1966 Alvis TF (247 Nm @ 3750 RPM) has 19 more torque (in Nm) than 2010 Mazda 3. (228 Nm @ 4000 RPM). This means 1966 Alvis TF will have an easier job in driving up hills or pulling heavy equipment than 2010 Mazda 3.

Compare all specifications:

1966 Alvis TF 2010 Mazda 3
Make Alvis Mazda
Model TF 3
Year Released 1966 2010
Body Type Convertible Sedan
Engine Position Front Front
Engine Size 2993 cc 2500 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 150 HP 167 HP
Engine RPM 4750 RPM 6000 RPM
Torque 247 Nm 228 Nm
Torque RPM 3750 RPM 4000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Length 4810 mm 4506 mm
Vehicle Width 1680 mm 1755 mm
Vehicle Height 1470 mm 1471 mm
Wheelbase Size 2840 mm 2639 mm
Fuel Tank Capacity 64 L 60 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]