1971 Holden Belmont vs. 1960 Toyota Crown

To start off, 1971 Holden Belmont is newer by 11 year(s). Which means there will be less support and parts availability for 1960 Toyota Crown. In addition, the cost of maintenance, including insurance, on 1960 Toyota Crown would be higher. At 5,042 cc (8 cylinders), 1971 Holden Belmont is equipped with a bigger engine. In terms of performance, 1971 Holden Belmont (238 HP @ 4600 RPM) has 162 more horse power than 1960 Toyota Crown. (76 HP @ 5000 RPM). In normal driving conditions, 1971 Holden Belmont should accelerate faster than 1960 Toyota Crown. With that said, vehicle weight also plays an important factor in acceleration. 1971 Holden Belmont weights approximately 30 kg more than 1960 Toyota Crown. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Belmont (427 Nm @ 3000 RPM) has 284 more torque (in Nm) than 1960 Toyota Crown. (143 Nm @ 3400 RPM). This means 1971 Holden Belmont will have an easier job in driving up hills or pulling heavy equipment than 1960 Toyota Crown.

Compare all specifications:

1971 Holden Belmont 1960 Toyota Crown
Make Holden Toyota
Model Belmont Crown
Year Released 1971 1960
Engine Position Front Front
Engine Size 5042 cc 1897 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 238 HP 76 HP
Engine RPM 4600 RPM 5000 RPM
Torque 427 Nm 143 Nm
Torque RPM 3000 RPM 3400 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1380 kg 1350 kg
Vehicle Length 4770 mm 4370 mm
Vehicle Width 1890 mm 1700 mm
Vehicle Height 1380 mm 1550 mm
Wheelbase Size 2830 mm 2540 mm