1971 Holden Monaro vs. 1973 Mercury Comet

To start off, 1973 Mercury Comet is newer by 2 year(s). Which means there will be less support and parts availability for 1971 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1971 Holden Monaro would be higher. At 5,040 cc (8 cylinders), 1971 Holden Monaro is equipped with a bigger engine. In terms of performance, 1971 Holden Monaro (238 HP @ 4600 RPM) has 156 more horse power than 1973 Mercury Comet. (82 HP @ 4400 RPM). In normal driving conditions, 1971 Holden Monaro should accelerate faster than 1973 Mercury Comet. With that said, vehicle weight also plays an important factor in acceleration. 1971 Holden Monaro weights approximately 160 kg more than 1973 Mercury Comet. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1971 Holden Monaro (427 Nm @ 3000 RPM) has 248 more torque (in Nm) than 1973 Mercury Comet. (179 Nm @ 1800 RPM). This means 1971 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 1973 Mercury Comet.

Compare all specifications:

1971 Holden Monaro 1973 Mercury Comet
Make Holden Mercury
Model Monaro Comet
Year Released 1971 1973
Engine Position Front Front
Engine Size 5040 cc 2782 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 238 HP 82 HP
Engine RPM 4600 RPM 4400 RPM
Torque 427 Nm 179 Nm
Torque RPM 3000 RPM 1800 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Transmission Type Manual Manual
Vehicle Weight 1380 kg 1220 kg
Vehicle Length 4770 mm 4800 mm
Vehicle Width 1890 mm 1800 mm
Vehicle Height 1360 mm 1360 mm
Wheelbase Size 2830 mm 2800 mm