1975 Alpine A 310 vs. 2008 Chrysler Pacifica
To start off, 2008 Chrysler Pacifica is newer by 33 year(s). Which means there will be less support and parts availability for 1975 Alpine A 310. In addition, the cost of maintenance, including insurance, on 1975 Alpine A 310 would be higher. At 3,952 cc (6 cylinders), 2008 Chrysler Pacifica is equipped with a bigger engine. In terms of performance, 2008 Chrysler Pacifica (253 HP @ 6000 RPM) has 126 more horse power than 1975 Alpine A 310. (127 HP @ 6250 RPM) In normal driving conditions, 2008 Chrysler Pacifica should accelerate faster than 1975 Alpine A 310. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Pacifica weights approximately 795 kg more than 1975 Alpine A 310. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1975 Alpine A 310 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1975 Alpine A 310. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Pacifica, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Pacifica (355 Nm @ 4200 RPM) has 209 more torque (in Nm) than 1975 Alpine A 310. (146 Nm @ 5000 RPM). This means 2008 Chrysler Pacifica will have an easier job in driving up hills or pulling heavy equipment than 1975 Alpine A 310. 2008 Chrysler Pacifica has automatic transmission and 1975 Alpine A 310 has manual transmission. 1975 Alpine A 310 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Pacifica will be easier to drive especially in heavy traffic.
Compare all specifications:
1975 Alpine A 310 | 2008 Chrysler Pacifica | |
Make | Alpine | Chrysler |
Model | A 310 | Pacifica |
Year Released | 1975 | 2008 |
Body Type | Coupe | Crossover |
Engine Position | Rear | Front |
Engine Size | 1604 cc | 3952 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Horse Power | 127 HP | 253 HP |
Engine RPM | 6250 RPM | 6000 RPM |
Torque | 146 Nm | 355 Nm |
Torque RPM | 5000 RPM | 4200 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 4 seats | 6 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 825 kg | 1620 kg |
Vehicle Length | 4190 mm | 5050 mm |
Vehicle Width | 1630 mm | 2020 mm |
Vehicle Height | 1160 mm | 1740 mm |
Wheelbase Size | 2280 mm | 2960 mm |
Fuel Tank Capacity | 60 L | 87 L |