1976 Cadillac Seville vs. 2007 Ford Bantam
To start off, 2007 Ford Bantam is newer by 31 year(s). Which means there will be less support and parts availability for 1976 Cadillac Seville. In addition, the cost of maintenance, including insurance, on 1976 Cadillac Seville would be higher. At 5,734 cc (8 cylinders), 1976 Cadillac Seville is equipped with a bigger engine. In terms of performance, 1976 Cadillac Seville (177 HP @ 4400 RPM) has 83 more horse power than 2007 Ford Bantam. (94 HP @ 5500 RPM). In normal driving conditions, 1976 Cadillac Seville should accelerate faster than 2007 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 1976 Cadillac Seville weights approximately 864 kg more than 2007 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1976 Cadillac Seville is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Cadillac Seville. However, in wet, icy, snow, or gravel driving conditions, 2007 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1976 Cadillac Seville (372 Nm @ 2000 RPM) has 234 more torque (in Nm) than 2007 Ford Bantam. (138 Nm @ 2500 RPM). This means 1976 Cadillac Seville will have an easier job in driving up hills or pulling heavy equipment than 2007 Ford Bantam. 1976 Cadillac Seville has automatic transmission and 2007 Ford Bantam has manual transmission. 2007 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1976 Cadillac Seville will be easier to drive especially in heavy traffic.
Compare all specifications:
1976 Cadillac Seville | 2007 Ford Bantam | |
Make | Cadillac | Ford |
Model | Seville | Bantam |
Year Released | 1976 | 2007 |
Body Type | Sedan | Pickup |
Engine Position | Front | Front |
Engine Size | 5734 cc | 1597 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 177 HP | 94 HP |
Engine RPM | 4400 RPM | 5500 RPM |
Torque | 372 Nm | 138 Nm |
Torque RPM | 2000 RPM | 2500 RPM |
Engine Bore Size | 103 mm | 82 mm |
Engine Stroke Size | 86 mm | 75.5 mm |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1900 kg | 1036 kg |
Vehicle Length | 5190 mm | 4280 mm |
Vehicle Width | 1830 mm | 1470 mm |
Vehicle Height | 1400 mm | 1640 mm |
Wheelbase Size | 2910 mm | 2670 mm |
Fuel Tank Capacity | 79 L | 54 L |