1976 Ford Capri vs. 2008 Hyundai Sonata
To start off, 2008 Hyundai Sonata is newer by 32 year(s). Which means there will be less support and parts availability for 1976 Ford Capri. In addition, the cost of maintenance, including insurance, on 1976 Ford Capri would be higher. At 2,657 cc (4 cylinders), 2008 Hyundai Sonata is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Hyundai Sonata weights approximately 675 kg more than 1976 Ford Capri.
Because 1976 Ford Capri is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1976 Ford Capri. However, in wet, icy, snow, or gravel driving conditions, 2008 Hyundai Sonata, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Hyundai Sonata (250 Nm @ 4000 RPM) has 163 more torque (in Nm) than 1976 Ford Capri. (87 Nm @ 3000 RPM). This means 2008 Hyundai Sonata will have an easier job in driving up hills or pulling heavy equipment than 1976 Ford Capri.
Compare all specifications:
1976 Ford Capri | 2008 Hyundai Sonata | |
Make | Ford | Hyundai |
Model | Capri | Sonata |
Year Released | 1976 | 2008 |
Body Type | Coupe | Sedan |
Engine Position | Front | Front |
Engine Size | 1294 cc | 2657 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 54 HP | 0 HP |
Torque | 87 Nm | 250 Nm |
Torque RPM | 3000 RPM | 4000 RPM |
Engine Compression Ratio | 8.0:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1010 kg | 1685 kg |
Vehicle Length | 4290 mm | 4750 mm |
Vehicle Width | 1710 mm | 1830 mm |
Vehicle Height | 1360 mm | 1430 mm |
Wheelbase Size | 2560 mm | 2710 mm |