1977 Chrysler 1610 vs. 2002 Acura CL

To start off, 2002 Acura CL is newer by 25 year(s). Which means there will be less support and parts availability for 1977 Chrysler 1610. In addition, the cost of maintenance, including insurance, on 1977 Chrysler 1610 would be higher. At 3,210 cc (6 cylinders), 2002 Acura CL is equipped with a bigger engine. In terms of performance, 2002 Acura CL (260 HP @ 6900 RPM) has 150 more horse power than 1977 Chrysler 1610. (110 HP @ 5800 RPM) In normal driving conditions, 2002 Acura CL should accelerate faster than 1977 Chrysler 1610. With that said, vehicle weight also plays an important factor in acceleration. 2002 Acura CL weights approximately 455 kg more than 1977 Chrysler 1610. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1977 Chrysler 1610 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1977 Chrysler 1610. However, in wet, icy, snow, or gravel driving conditions, 2002 Acura CL, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2002 Acura CL (315 Nm @ 3500 RPM) has 156 more torque (in Nm) than 1977 Chrysler 1610. (159 Nm @ 3400 RPM). This means 2002 Acura CL will have an easier job in driving up hills or pulling heavy equipment than 1977 Chrysler 1610. 2002 Acura CL has automatic transmission and 1977 Chrysler 1610 has manual transmission. 1977 Chrysler 1610 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2002 Acura CL will be easier to drive especially in heavy traffic.

Compare all specifications:

1977 Chrysler 1610 2002 Acura CL
Make Chrysler Acura
Model 1610 CL
Year Released 1977 2002
Engine Position Front Front
Engine Size 1981 cc 3210 cc
Engine Cylinders 4 cylinders 6 cylinders
Engine Type in-line V
Horse Power 110 HP 260 HP
Engine RPM 5800 RPM 6900 RPM
Torque 159 Nm 315 Nm
Torque RPM 3400 RPM 3500 RPM
Engine Bore Size 91.7 mm 89 mm
Engine Stroke Size 75 mm 86 mm
Engine Compression Ratio 9.5:1 9.8:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1125 kg 1580 kg
Vehicle Length 4540 mm 4880 mm
Vehicle Width 1740 mm 1800 mm
Vehicle Height 1450 mm 1420 mm
Wheelbase Size 2680 mm 2580 mm
Fuel Tank Capacity 65 L 65 L