1977 Ford 2000 vs. 1979 Mazda 121

To start off, 1979 Mazda 121 is newer by 2 year(s). Which means there will be less support and parts availability for 1977 Ford 2000. In addition, the cost of maintenance, including insurance, on 1977 Ford 2000 would be higher. At 1,993 cc (4 cylinders), 1977 Ford 2000 is equipped with a bigger engine. In terms of performance, 1977 Ford 2000 (100 HP @ 5200 RPM) has 10 more horse power than 1979 Mazda 121. (90 HP @ 4800 RPM). In normal driving conditions, 1977 Ford 2000 should accelerate faster than 1979 Mazda 121. With that said, vehicle weight also plays an important factor in acceleration. 1977 Ford 2000 weights approximately 198 kg more than 1979 Mazda 121. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1979 Mazda 121 (160 Nm @ 3000 RPM) has 10 more torque (in Nm) than 1977 Ford 2000. (150 Nm @ 4000 RPM). This means 1979 Mazda 121 will have an easier job in driving up hills or pulling heavy equipment than 1977 Ford 2000.

Compare all specifications:

1977 Ford 2000 1979 Mazda 121
Make Ford Mazda
Model 2000 121
Year Released 1977 1979
Engine Position Front Front
Engine Size 1993 cc 1970 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 100 HP 90 HP
Engine RPM 5200 RPM 4800 RPM
Torque 150 Nm 160 Nm
Torque RPM 4000 RPM 3000 RPM
Engine Bore Size 90.8 mm 80 mm
Engine Stroke Size 77 mm 98 mm
Engine Compression Ratio 9.2:1 8.6:1
Drive Type Rear Rear
Number of Seats 5 seats 4 seats
Vehicle Weight 1332 kg 1134 kg
Vehicle Length 4740 mm 4510 mm
Vehicle Width 1800 mm 1690 mm
Vehicle Height 1390 mm 1350 mm
Wheelbase Size 2780 mm 2520 mm