1986 BMW 628 vs. 2010 Lancia Ypsilon

To start off, 2010 Lancia Ypsilon is newer by 24 year(s). Which means there will be less support and parts availability for 1986 BMW 628. In addition, the cost of maintenance, including insurance, on 1986 BMW 628 would be higher. At 2,788 cc (6 cylinders), 1986 BMW 628 is equipped with a bigger engine. In terms of performance, 1986 BMW 628 (181 HP @ 6000 RPM) has 87 more horse power than 2010 Lancia Ypsilon. (94 HP @ 5800 RPM). In normal driving conditions, 1986 BMW 628 should accelerate faster than 2010 Lancia Ypsilon. With that said, vehicle weight also plays an important factor in acceleration. 1986 BMW 628 weights approximately 415 kg more than 2010 Lancia Ypsilon. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1986 BMW 628 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1986 BMW 628. However, in wet, icy, snow, or gravel driving conditions, 2010 Lancia Ypsilon, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1986 BMW 628 (240 Nm @ 4000 RPM) has 112 more torque (in Nm) than 2010 Lancia Ypsilon. (128 Nm @ 4500 RPM). This means 1986 BMW 628 will have an easier job in driving up hills or pulling heavy equipment than 2010 Lancia Ypsilon. 2010 Lancia Ypsilon has automatic transmission and 1986 BMW 628 has manual transmission. 1986 BMW 628 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Lancia Ypsilon will be easier to drive especially in heavy traffic.

Compare all specifications:

1986 BMW 628 2010 Lancia Ypsilon
Make BMW Lancia
Model 628 Ypsilon
Year Released 1986 2010
Body Type Coupe Hatchback
Engine Position Front Front
Engine Size 2788 cc 1368 cc
Engine Cylinders 6 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 181 HP 94 HP
Engine RPM 6000 RPM 5800 RPM
Torque 240 Nm 128 Nm
Torque RPM 4000 RPM 4500 RPM
Engine Bore Size 86 mm 72 mm
Engine Stroke Size 80 mm 84 mm
Engine Compression Ratio 9.3:1 11.0:1
Fuel Type Gasoline Gasoline - Premium
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 3 doors
Vehicle Weight 1470 kg 1055 kg
Vehicle Length 4760 mm 3820 mm
Vehicle Width 1730 mm 1710 mm
Vehicle Height 1370 mm 1540 mm
Wheelbase Size 2640 mm 2390 mm
Fuel Tank Capacity 70 L 47 L