1990 BMW 316 vs. 2008 Honda CR-V

To start off, 2008 Honda CR-V is newer by 18 year(s). Which means there will be less support and parts availability for 1990 BMW 316. In addition, the cost of maintenance, including insurance, on 1990 BMW 316 would be higher. At 1,998 cc, 2008 Honda CR-V is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Honda CR-V weights approximately 482 kg more than 1990 BMW 316.

Because 2008 Honda CR-V is four wheel drive (4WD), it will have significant more traction and grip than 1990 BMW 316. In wet, icy, snow, or gravel driving conditions, 2008 Honda CR-V will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Honda CR-V (190 Nm @ 4000 RPM) has 49 more torque (in Nm) than 1990 BMW 316. (141 Nm @ 4250 RPM). This means 2008 Honda CR-V will have an easier job in driving up hills or pulling heavy equipment than 1990 BMW 316. 2008 Honda CR-V has automatic transmission and 1990 BMW 316 has manual transmission. 1990 BMW 316 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Honda CR-V will be easier to drive especially in heavy traffic.

Compare all specifications:

1990 BMW 316 2008 Honda CR-V
Make BMW Honda
Model 316 CR-V
Year Released 1990 2008
Body Type Sedan SUV
Engine Position Front Front
Engine Size 1596 cc 1998 cc
Horse Power 100 HP 0 HP
Torque 141 Nm 190 Nm
Torque RPM 4250 RPM 4000 RPM
Engine Compression Ratio 9.0:1 9.8:1
Fuel Type Gasoline Gasoline
Drive Type Rear 4WD
Transmission Type Manual Automatic
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1080 kg 1562 kg
Vehicle Length 4330 mm 4640 mm
Vehicle Height 1390 mm 1720 mm
Wheelbase Size 2580 mm 2630 mm
Fuel Tank Capacity 70 L 58 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]