1991 Audi 200 vs. 1993 Beijing BJ 212
To start off, 1993 Beijing BJ 212 is newer by 2 year(s). Which means there will be less support and parts availability for 1991 Audi 200. In addition, the cost of maintenance, including insurance, on 1991 Audi 200 would be higher. At 2,226 cc (5 cylinders), 1991 Audi 200 is equipped with a bigger engine. In terms of performance, 1991 Audi 200 (217 HP @ 5700 RPM) has 130 more horse power than 1993 Beijing BJ 212. (87 HP @ 4250 RPM). In normal driving conditions, 1991 Audi 200 should accelerate faster than 1993 Beijing BJ 212. With that said, vehicle weight also plays an important factor in acceleration. 1993 Beijing BJ 212 weights approximately 6 kg more than 1991 Audi 200.
Both vehicles are four wheel drive (4WD) - it offers better handling, traction, and control in all driving conditions compared with front wheel drive or rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1991 Audi 200 (315 Nm @ 1950 RPM) has 134 more torque (in Nm) than 1993 Beijing BJ 212. (181 Nm @ 2000 RPM). This means 1991 Audi 200 will have an easier job in driving up hills or pulling heavy equipment than 1993 Beijing BJ 212.
Compare all specifications:
1991 Audi 200 | 1993 Beijing BJ 212 | |
Make | Audi | Beijing |
Model | 200 | BJ 212 |
Year Released | 1991 | 1993 |
Engine Size | 2226 cc | 2068 cc |
Engine Cylinders | 5 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Horse Power | 217 HP | 87 HP |
Engine RPM | 5700 RPM | 4250 RPM |
Torque | 315 Nm | 181 Nm |
Torque RPM | 1950 RPM | 2000 RPM |
Fuel Type | Gasoline | Diesel |
Drive Type | 4WD | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1524 kg | 1530 kg |
Vehicle Length | 4800 mm | 3910 mm |
Vehicle Width | 1820 mm | 1760 mm |
Vehicle Height | 1430 mm | 1880 mm |
Wheelbase Size | 2700 mm | 2310 mm |