1998 Chrysler Concorde vs. 2006 Mercedes-Benz CL

To start off, 2006 Mercedes-Benz CL is newer by 8 year(s). Which means there will be less support and parts availability for 1998 Chrysler Concorde. In addition, the cost of maintenance, including insurance, on 1998 Chrysler Concorde would be higher. At 4,966 cc (8 cylinders), 2006 Mercedes-Benz CL is equipped with a bigger engine. In terms of performance, 2006 Mercedes-Benz CL (303 HP @ 5600 RPM) has 113 more horse power than 1998 Chrysler Concorde. (190 HP @ 5800 RPM) In normal driving conditions, 2006 Mercedes-Benz CL should accelerate faster than 1998 Chrysler Concorde. With that said, vehicle weight also plays an important factor in acceleration. 2006 Mercedes-Benz CL weights approximately 310 kg more than 1998 Chrysler Concorde. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2006 Mercedes-Benz CL is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2006 Mercedes-Benz CL. However, in wet, icy, snow, or gravel driving conditions, 1998 Chrysler Concorde, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2006 Mercedes-Benz CL (460 Nm @ 2700 RPM) has 205 more torque (in Nm) than 1998 Chrysler Concorde. (255 Nm @ 4850 RPM). This means 2006 Mercedes-Benz CL will have an easier job in driving up hills or pulling heavy equipment than 1998 Chrysler Concorde.

Compare all specifications:

1998 Chrysler Concorde 2006 Mercedes-Benz CL
Make Chrysler Mercedes-Benz
Model Concorde CL
Year Released 1998 2006
Body Type Sedan Coupe
Engine Position Front Front
Engine Size 2734 cc 4966 cc
Engine Cylinders 6 cylinders 8 cylinders
Engine Type V V
Valves per Cylinder 4 valves 3 valves
Horse Power 190 HP 303 HP
Engine RPM 5800 RPM 5600 RPM
Torque 255 Nm 460 Nm
Torque RPM 4850 RPM 2700 RPM
Engine Bore Size 86 mm 97 mm
Engine Stroke Size 78.5 mm 84 mm
Engine Compression Ratio 10.0:1 10.0:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Automatic Automatic
Number of Seats 5 seats 4 seats
Number of Doors 4 doors 2 doors
Vehicle Weight 1575 kg 1885 kg
Vehicle Length 5280 mm 4920 mm
Vehicle Width 1900 mm 1880 mm
Vehicle Height 1420 mm 1410 mm
Wheelbase Size 2880 mm 2860 mm
Fuel Tank Capacity 68 L 88 L