2000 Chrysler 300 vs. 1973 Mercedes-Benz 280
To start off, 2000 Chrysler 300 is newer by 27 year(s). Which means there will be less support and parts availability for 1973 Mercedes-Benz 280. In addition, the cost of maintenance, including insurance, on 1973 Mercedes-Benz 280 would be higher. At 2,778 cc (6 cylinders), 1973 Mercedes-Benz 280 is equipped with a bigger engine. In terms of performance, 2000 Chrysler 300 (200 HP @ 5800 RPM) has 30 more horse power than 1973 Mercedes-Benz 280. (170 HP @ 5750 RPM). In normal driving conditions, 2000 Chrysler 300 should accelerate faster than 1973 Mercedes-Benz 280. With that said, vehicle weight also plays an important factor in acceleration. 2000 Chrysler 300 weights approximately 285 kg more than 1973 Mercedes-Benz 280. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1973 Mercedes-Benz 280 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1973 Mercedes-Benz 280. However, in wet, icy, snow, or gravel driving conditions, 2000 Chrysler 300, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2000 Chrysler 300 (255 Nm @ 4900 RPM) has 15 more torque (in Nm) than 1973 Mercedes-Benz 280. (240 Nm @ 4500 RPM). This means 2000 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1973 Mercedes-Benz 280. 2000 Chrysler 300 has automatic transmission and 1973 Mercedes-Benz 280 has manual transmission. 1973 Mercedes-Benz 280 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2000 Chrysler 300 will be easier to drive especially in heavy traffic.
Compare all specifications:
2000 Chrysler 300 | 1973 Mercedes-Benz 280 | |
Make | Chrysler | Mercedes-Benz |
Model | 300 | 280 |
Year Released | 2000 | 1973 |
Engine Position | Front | Front |
Engine Size | 2736 cc | 2778 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 200 HP | 170 HP |
Engine RPM | 5800 RPM | 5750 RPM |
Torque | 255 Nm | 240 Nm |
Torque RPM | 4900 RPM | 4500 RPM |
Engine Bore Size | 86 mm | 86.5 mm |
Engine Stroke Size | 78.5 mm | 78.8 mm |
Drive Type | Front | Rear |
Transmission Type | Automatic | Manual |
Number of Seats | 5 seats | 2 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1580 kg | 1295 kg |
Vehicle Length | 5010 mm | 4310 mm |
Vehicle Width | 1930 mm | 1770 mm |
Vehicle Height | 1420 mm | 1320 mm |
Wheelbase Size | 2880 mm | 2410 mm |