2003 Alfa Romeo 166 vs. 1949 Jensen Interceptor
To start off, 2003 Alfa Romeo 166 is newer by 54 year(s). Which means there will be less support and parts availability for 1949 Jensen Interceptor. In addition, the cost of maintenance, including insurance, on 1949 Jensen Interceptor would be higher. At 3,990 cc (6 cylinders), 1949 Jensen Interceptor is equipped with a bigger engine. In terms of performance, 2003 Alfa Romeo 166 (217 HP @ 6300 RPM) has 87 more horse power than 1949 Jensen Interceptor. (130 HP @ 3700 RPM). In normal driving conditions, 2003 Alfa Romeo 166 should accelerate faster than 1949 Jensen Interceptor. With that said, vehicle weight also plays an important factor in acceleration. 2003 Alfa Romeo 166 weights approximately 51 kg more than 1949 Jensen Interceptor. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 1949 Jensen Interceptor is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1949 Jensen Interceptor. However, in wet, icy, snow, or gravel driving conditions, 2003 Alfa Romeo 166, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1949 Jensen Interceptor (288 Nm @ 2200 RPM) has 23 more torque (in Nm) than 2003 Alfa Romeo 166. (265 Nm @ 5000 RPM). This means 1949 Jensen Interceptor will have an easier job in driving up hills or pulling heavy equipment than 2003 Alfa Romeo 166. 2003 Alfa Romeo 166 has automatic transmission and 1949 Jensen Interceptor has manual transmission. 1949 Jensen Interceptor will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Alfa Romeo 166 will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2003 Alfa Romeo 166 | 1949 Jensen Interceptor | |
| Make | Alfa Romeo | Jensen |
| Model | 166 | Interceptor |
| Year Released | 2003 | 1949 |
| Engine Position | Front | Front |
| Engine Size | 2959 cc | 3990 cc |
| Engine Cylinders | 6 cylinders | 6 cylinders |
| Engine Type | V | in-line |
| Horse Power | 217 HP | 130 HP |
| Engine RPM | 6300 RPM | 3700 RPM |
| Torque | 265 Nm | 288 Nm |
| Torque RPM | 5000 RPM | 2200 RPM |
| Engine Bore Size | 93 mm | 87.3 mm |
| Engine Stroke Size | 72.6 mm | 111.1 mm |
| Engine Compression Ratio | 10.0:1 | 6.8:1 |
| Top Speed | 236 km/hour | 164 km/hour |
| Drive Type | Front | Rear |
| Transmission Type | Automatic | Manual |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 2 doors |
| Vehicle Weight | 1550 kg | 1499 kg |
| Vehicle Length | 4730 mm | 4830 mm |
| Vehicle Width | 1810 mm | 1680 mm |
| Vehicle Height | 1420 mm | 1480 mm |
| Wheelbase Size | 2600 mm | 2860 mm |
| Fuel Tank Capacity | 69 L | 59 L |
