2005 Alfa Romeo 156 vs. 1972 Holden Monaro
To start off, 2005 Alfa Romeo 156 is newer by 33 year(s). Which means there will be less support and parts availability for 1972 Holden Monaro. In addition, the cost of maintenance, including insurance, on 1972 Holden Monaro would be higher. At 2,834 cc (6 cylinders), 1972 Holden Monaro is equipped with a bigger engine. In terms of performance, 2005 Alfa Romeo 156 (173 HP @ 4000 RPM) has 57 more horse power than 1972 Holden Monaro. (116 HP @ 4400 RPM). In normal driving conditions, 2005 Alfa Romeo 156 should accelerate faster than 1972 Holden Monaro. With that said, vehicle weight also plays an important factor in acceleration. 1972 Holden Monaro weights approximately 90 kg more than 2005 Alfa Romeo 156.
Because 1972 Holden Monaro is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1972 Holden Monaro. However, in wet, icy, snow, or gravel driving conditions, 2005 Alfa Romeo 156, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1972 Holden Monaro (228 Nm @ 2000 RPM) has 41 more torque (in Nm) than 2005 Alfa Romeo 156. (187 Nm @ 3500 RPM). This means 1972 Holden Monaro will have an easier job in driving up hills or pulling heavy equipment than 2005 Alfa Romeo 156.
Compare all specifications:
2005 Alfa Romeo 156 | 1972 Holden Monaro | |
Make | Alfa Romeo | Holden |
Model | 156 | Monaro |
Year Released | 2005 | 1972 |
Engine Position | Front | Front |
Engine Size | 1970 cc | 2834 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 173 HP | 116 HP |
Engine RPM | 4000 RPM | 4400 RPM |
Torque | 187 Nm | 228 Nm |
Torque RPM | 3500 RPM | 2000 RPM |
Drive Type | Front | Rear |
Vehicle Weight | 1250 kg | 1340 kg |
Wheelbase Size | 2710 mm | 2830 mm |