2005 Alfa Romeo 166 vs. 2010 Mazda 3

To start off, 2010 Mazda 3 is newer by 5 year(s). Which means there will be less support and parts availability for 2005 Alfa Romeo 166. In addition, the cost of maintenance, including insurance, on 2005 Alfa Romeo 166 would be higher. At 2,000 cc (4 cylinders), 2010 Mazda 3 is equipped with a bigger engine. In terms of performance, both vehicles can yield 148 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 2005 Alfa Romeo 166 weights approximately 194 kg more than 2010 Mazda 3.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2010 Mazda 3 (183 Nm @ 4500 RPM) has 2 more torque (in Nm) than 2005 Alfa Romeo 166. (181 Nm @ 3800 RPM). This means 2010 Mazda 3 will have an easier job in driving up hills or pulling heavy equipment than 2005 Alfa Romeo 166.

Compare all specifications:

2005 Alfa Romeo 166 2010 Mazda 3
Make Alfa Romeo Mazda
Model 166 3
Year Released 2005 2010
Body Type Sedan Sedan
Engine Position Front Front
Engine Size 1970 cc 2000 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 4 valves
Horse Power 148 HP 148 HP
Engine RPM 6500 RPM 6500 RPM
Torque 181 Nm 183 Nm
Torque RPM 3800 RPM 4500 RPM
Fuel Type Gasoline - Premium Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1495 kg 1301 kg
Vehicle Length 4730 mm 4590 mm
Vehicle Width 1810 mm 1755 mm
Vehicle Height 1420 mm 1471 mm
Wheelbase Size 2710 mm 2639 mm
Fuel Tank Capacity 70 L 55 L