2005 Ford Shelby GR-1 Concept vs. 2010 Fiat Panda
To start off, 2010 Fiat Panda is newer by 5 year(s). Which means there will be less support and parts availability for 2005 Ford Shelby GR-1 Concept. In addition, the cost of maintenance, including insurance, on 2005 Ford Shelby GR-1 Concept would be higher. At 6,392 cc (10 cylinders), 2005 Ford Shelby GR-1 Concept is equipped with a bigger engine. In terms of performance, 2005 Ford Shelby GR-1 Concept (605 HP @ 6750 RPM) has 546 more horse power than 2010 Fiat Panda. (59 HP @ 5000 RPM). In normal driving conditions, 2005 Ford Shelby GR-1 Concept should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2005 Ford Shelby GR-1 Concept weights approximately 816 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2005 Ford Shelby GR-1 Concept is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Ford Shelby GR-1 Concept. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2005 Ford Shelby GR-1 Concept (679 Nm @ 5500 RPM) has 577 more torque (in Nm) than 2010 Fiat Panda. (102 Nm @ 2500 RPM). This means 2005 Ford Shelby GR-1 Concept will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 2010 Fiat Panda has automatic transmission and 2005 Ford Shelby GR-1 Concept has manual transmission. 2005 Ford Shelby GR-1 Concept will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2010 Fiat Panda will be easier to drive especially in heavy traffic.
Compare all specifications:
2005 Ford Shelby GR-1 Concept | 2010 Fiat Panda | |
Make | Ford | Fiat |
Model | Shelby GR-1 Concept | Panda |
Year Released | 2005 | 2010 |
Body Type | Coupe | Hatchback |
Engine Position | Front | Front |
Engine Size | 6392 cc | 1242 cc |
Engine Cylinders | 10 cylinders | 4 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 4 valves | 2 valves |
Horse Power | 605 HP | 59 HP |
Engine RPM | 6750 RPM | 5000 RPM |
Torque | 679 Nm | 102 Nm |
Torque RPM | 5500 RPM | 2500 RPM |
Engine Bore Size | 93.1 mm | 70.9 mm |
Engine Stroke Size | 94 mm | 78.9 mm |
Engine Compression Ratio | 10.8:1 | 9.8:1 |
Fuel Type | Gasoline | Gasoline - Premium |
Drive Type | Rear | Front |
Transmission Type | Manual | Automatic |
Number of Seats | 2 seats | 5 seats |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1769 kg | 953 kg |
Vehicle Length | 4420 mm | 3540 mm |
Vehicle Width | 1900 mm | 1600 mm |
Vehicle Height | 1170 mm | 1580 mm |
Wheelbase Size | 2550 mm | 2310 mm |
Fuel Tank Capacity | 132 L | 35 L |