2008 Chrysler Aspen vs. 2007 Ford Bantam

To start off, 2008 Chrysler Aspen is newer by 1 year(s). Which means there will be less support and parts availability for 2007 Ford Bantam. In addition, the cost of maintenance, including insurance, on 2007 Ford Bantam would be higher. At 4,701 cc (8 cylinders), 2008 Chrysler Aspen is equipped with a bigger engine. In terms of performance, 2008 Chrysler Aspen (303 HP) has 229 more horse power than 2007 Ford Bantam. (74 HP). In normal driving conditions, 2008 Chrysler Aspen should accelerate faster than 2007 Ford Bantam. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Aspen weights approximately 855 kg more than 2007 Ford Bantam. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2008 Chrysler Aspen is four wheel drive (4WD), it will have significant more traction and grip than 2007 Ford Bantam. In wet, icy, snow, or gravel driving conditions, 2008 Chrysler Aspen will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Aspen (447 Nm @ 3950 RPM) has 336 more torque (in Nm) than 2007 Ford Bantam. (111 Nm @ 3000 RPM). This means 2008 Chrysler Aspen will have an easier job in driving up hills or pulling heavy equipment than 2007 Ford Bantam. 2008 Chrysler Aspen has automatic transmission and 2007 Ford Bantam has manual transmission. 2007 Ford Bantam will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Aspen will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Aspen 2007 Ford Bantam
Make Chrysler Ford
Model Aspen Bantam
Year Released 2008 2007
Body Type SUV Pickup
Engine Position Front Front
Engine Size 4701 cc 1297 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type V in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 303 HP 74 HP
Torque 447 Nm 111 Nm
Torque RPM 3950 RPM 3000 RPM
Drive Type 4WD Front
Transmission Type Automatic Manual
Number of Seats 8 seats 2 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1815 kg 960 kg
Vehicle Length 5110 mm 4280 mm
Vehicle Width 1940 mm 1470 mm
Vehicle Height 1890 mm 1640 mm
Wheelbase Size 3030 mm 2670 mm
Fuel Consumption Overall 15.7 L/100km 8.8 L/100km
Fuel Tank Capacity 102 L 54 L