2008 Chrysler Sebring vs. 1962 Fiat 1100

To start off, 2008 Chrysler Sebring is newer by 46 year(s). Which means there will be less support and parts availability for 1962 Fiat 1100. In addition, the cost of maintenance, including insurance, on 1962 Fiat 1100 would be higher. At 1,968 cc (4 cylinders), 2008 Chrysler Sebring is equipped with a bigger engine. In terms of performance, 2008 Chrysler Sebring (138 HP @ 4000 RPM) has 95 more horse power than 1962 Fiat 1100. (43 HP @ 5300 RPM). In normal driving conditions, 2008 Chrysler Sebring should accelerate faster than 1962 Fiat 1100. With that said, vehicle weight also plays an important factor in acceleration. 2008 Chrysler Sebring weights approximately 980 kg more than 1962 Fiat 1100. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1962 Fiat 1100 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1962 Fiat 1100. However, in wet, icy, snow, or gravel driving conditions, 2008 Chrysler Sebring, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Chrysler Sebring (311 Nm @ 1800 RPM) has 238 more torque (in Nm) than 1962 Fiat 1100. (73 Nm @ 3200 RPM). This means 2008 Chrysler Sebring will have an easier job in driving up hills or pulling heavy equipment than 1962 Fiat 1100. 2008 Chrysler Sebring has automatic transmission and 1962 Fiat 1100 has manual transmission. 1962 Fiat 1100 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Chrysler Sebring will be easier to drive especially in heavy traffic.

Compare all specifications:

2008 Chrysler Sebring 1962 Fiat 1100
Make Chrysler Fiat
Model Sebring 1100
Year Released 2008 1962
Engine Position Front Front
Engine Size 1968 cc 1089 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 138 HP 43 HP
Engine RPM 4000 RPM 5300 RPM
Torque 311 Nm 73 Nm
Torque RPM 1800 RPM 3200 RPM
Engine Bore Size 81 mm 68 mm
Engine Stroke Size 95.5 mm 74.9 mm
Fuel Type Diesel Gasoline
Drive Type Front Rear
Transmission Type Automatic Manual
Number of Seats 4 seats 5 seats
Number of Doors 2 doors 4 doors
Vehicle Weight 1850 kg 870 kg
Vehicle Length 4940 mm 3780 mm
Vehicle Width 1850 mm 1470 mm
Vehicle Height 1490 mm 1490 mm
Wheelbase Size 2770 mm 2340 mm
Fuel Tank Capacity 64 L 57 L