2008 Fiat Bravo vs. 1961 Sunbeam Alpine

To start off, 2008 Fiat Bravo is newer by 47 year(s). Which means there will be less support and parts availability for 1961 Sunbeam Alpine. In addition, the cost of maintenance, including insurance, on 1961 Sunbeam Alpine would be higher. At 1,592 cc (4 cylinders), 1961 Sunbeam Alpine is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Fiat Bravo weights approximately 355 kg more than 1961 Sunbeam Alpine.

Because 1961 Sunbeam Alpine is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1961 Sunbeam Alpine. However, in wet, icy, snow, or gravel driving conditions, 2008 Fiat Bravo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Fiat Bravo (206 Nm @ 1750 RPM) has 79 more torque (in Nm) than 1961 Sunbeam Alpine. (127 Nm @ 3400 RPM). This means 2008 Fiat Bravo will have an easier job in driving up hills or pulling heavy equipment than 1961 Sunbeam Alpine.

Compare all specifications:

2008 Fiat Bravo 1961 Sunbeam Alpine
Make Fiat Sunbeam
Model Bravo Alpine
Year Released 2008 1961
Engine Position Front Front
Engine Size 1368 cc 1592 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 4 valves 2 valves
Horse Power 0 HP 80 HP
Torque 206 Nm 127 Nm
Torque RPM 1750 RPM 3400 RPM
Engine Bore Size 72 mm 81.5 mm
Engine Stroke Size 84 mm 76.2 mm
Engine Compression Ratio 9.8:1 9.1:1
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Number of Seats 4 seats 2 seats
Number of Doors 5 doors 2 doors
Vehicle Weight 1350 kg 995 kg
Vehicle Length 4340 mm 3950 mm
Vehicle Width 1800 mm 1540 mm
Vehicle Height 1500 mm 1310 mm
Wheelbase Size 2810 mm 2190 mm
Fuel Tank Capacity 58 L 40 L