2009 Chrysler 300 vs. 1965 Fiat Coupe
To start off, 2009 Chrysler 300 is newer by 44 year(s). Which means there will be less support and parts availability for 1965 Fiat Coupe. In addition, the cost of maintenance, including insurance, on 1965 Fiat Coupe would be higher. At 6,059 cc (8 cylinders), 2009 Chrysler 300 is equipped with a bigger engine. In terms of performance, 2009 Chrysler 300 (425 HP @ 6200 RPM) has 277 more horse power than 1965 Fiat Coupe. (148 HP @ 5600 RPM). In normal driving conditions, 2009 Chrysler 300 should accelerate faster than 1965 Fiat Coupe. With that said, vehicle weight also plays an important factor in acceleration. 2009 Chrysler 300 weights approximately 643 kg more than 1965 Fiat Coupe. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Let's talk about torque, 2009 Chrysler 300 (570 Nm @ 4800 RPM) has 370 more torque (in Nm) than 1965 Fiat Coupe. (200 Nm @ 4000 RPM). This means 2009 Chrysler 300 will have an easier job in driving up hills or pulling heavy equipment than 1965 Fiat Coupe.
Compare all specifications:
2009 Chrysler 300 | 1965 Fiat Coupe | |
Make | Chrysler | Fiat |
Model | 300 | Coupe |
Year Released | 2009 | 1965 |
Body Type | Sedan | Coupe |
Engine Position | Front | Front |
Engine Size | 6059 cc | 2277 cc |
Engine Cylinders | 8 cylinders | 6 cylinders |
Engine Type | V | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 425 HP | 148 HP |
Engine RPM | 6200 RPM | 5600 RPM |
Torque | 570 Nm | 200 Nm |
Torque RPM | 4800 RPM | 4000 RPM |
Engine Bore Size | 103 mm | 78 mm |
Engine Stroke Size | 90.9 mm | 79.5 mm |
Engine Compression Ratio | 10.3:1 | 9.0:1 |
Fuel Type | Gasoline | Gasoline |
Number of Seats | 5 seats | 4 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 1873 kg | 1230 kg |
Vehicle Length | 5010 mm | 4630 mm |
Vehicle Width | 1890 mm | 1640 mm |
Vehicle Height | 1480 mm | 1370 mm |
Wheelbase Size | 3050 mm | 2660 mm |
Fuel Tank Capacity | 72 L | 38 L |