2009 Volkswagen Polo vs. 2013 Toyota Sequoia
To start off, 2013 Toyota Sequoia is newer by 4 year(s). Which means there will be less support and parts availability for 2009 Volkswagen Polo. In addition, the cost of maintenance, including insurance, on 2009 Volkswagen Polo would be higher. At 5,700 cc (8 cylinders), 2013 Toyota Sequoia is equipped with a bigger engine. In terms of performance, 2013 Toyota Sequoia (376 HP @ 5600 RPM) has 276 more horse power than 2009 Volkswagen Polo. (100 HP @ 5500 RPM) In normal driving conditions, 2013 Toyota Sequoia should accelerate faster than 2009 Volkswagen Polo. With that said, vehicle weight also plays an important factor in acceleration. 2013 Toyota Sequoia weights approximately 407 kg more than 2009 Volkswagen Polo. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2013 Toyota Sequoia is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2013 Toyota Sequoia. However, in wet, icy, snow, or gravel driving conditions, 2009 Volkswagen Polo, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2013 Toyota Sequoia (544 Nm @ 3600 RPM) has 404 more torque (in Nm) than 2009 Volkswagen Polo. (140 Nm @ 3300 RPM). This means 2013 Toyota Sequoia will have an easier job in driving up hills or pulling heavy equipment than 2009 Volkswagen Polo. 2013 Toyota Sequoia has automatic transmission and 2009 Volkswagen Polo has manual transmission. 2009 Volkswagen Polo will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2013 Toyota Sequoia will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2009 Volkswagen Polo | 2013 Toyota Sequoia | |
| Make | Volkswagen | Toyota |
| Model | Polo | Sequoia |
| Year Released | 2009 | 2013 |
| Engine Position | Front | Front |
| Engine Size | 1598 cc | 5700 cc |
| Engine Cylinders | 4 cylinders | 8 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 100 HP | 376 HP |
| Engine RPM | 5500 RPM | 5600 RPM |
| Torque | 140 Nm | 544 Nm |
| Torque RPM | 3300 RPM | 3600 RPM |
| Engine Bore Size | 87.1 mm | 94 mm |
| Engine Stroke Size | 76.5 mm | 102 mm |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Front | Rear |
| Transmission Type | Manual | 6-speed automatic |
| Number of Seats | 5 seats | 7 seats |
| Number of Doors | 4 doors | 5 doors |
| Vehicle Weight | 2307 kg | 2714 kg |
| Vehicle Length | 4200 mm | 5210 mm |
| Vehicle Width | 1660 mm | 2030 mm |
| Vehicle Height | 1470 mm | 1955 mm |
| Wheelbase Size | 2470 mm | 3100 mm |
| Fuel Tank Capacity | 45 L | 100 L |
