2010 Fiat Panda vs. 2008 Mercedes-Benz E
To start off, 2010 Fiat Panda is newer by 2 year(s). Which means there will be less support and parts availability for 2008 Mercedes-Benz E. In addition, the cost of maintenance, including insurance, on 2008 Mercedes-Benz E would be higher. At 2,986 cc (6 cylinders), 2008 Mercedes-Benz E is equipped with a bigger engine. In terms of performance, 2008 Mercedes-Benz E (187 HP @ 4000 RPM) has 134 more horse power than 2010 Fiat Panda. (53 HP @ 5000 RPM) In normal driving conditions, 2008 Mercedes-Benz E should accelerate faster than 2010 Fiat Panda. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mercedes-Benz E weights approximately 800 kg more than 2010 Fiat Panda. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2008 Mercedes-Benz E is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2008 Mercedes-Benz E. However, in wet, icy, snow, or gravel driving conditions, 2010 Fiat Panda, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2008 Mercedes-Benz E (400 Nm @ 1400 RPM) has 312 more torque (in Nm) than 2010 Fiat Panda. (88 Nm @ 2750 RPM). This means 2008 Mercedes-Benz E will have an easier job in driving up hills or pulling heavy equipment than 2010 Fiat Panda. 2008 Mercedes-Benz E has automatic transmission and 2010 Fiat Panda has manual transmission. 2010 Fiat Panda will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2008 Mercedes-Benz E will be easier to drive especially in heavy traffic.
Compare all specifications:
| 2010 Fiat Panda | 2008 Mercedes-Benz E | |
| Make | Fiat | Mercedes-Benz |
| Model | Panda | E |
| Year Released | 2010 | 2008 |
| Body Type | Hatchback | Sedan |
| Engine Position | Front | Front |
| Engine Size | 1107 cc | 2986 cc |
| Engine Cylinders | 4 cylinders | 6 cylinders |
| Engine Type | in-line | V |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 53 HP | 187 HP |
| Engine RPM | 5000 RPM | 4000 RPM |
| Torque | 88 Nm | 400 Nm |
| Torque RPM | 2750 RPM | 1400 RPM |
| Engine Bore Size | 70 mm | 83 mm |
| Engine Stroke Size | 72 mm | 92 mm |
| Engine Compression Ratio | 9.6:1 | 17.7:1 |
| Fuel Type | Gasoline - Premium | Diesel |
| Top Speed | 150 km/hour | 241 km/hour |
| Acceleration 0-100mph | 15 seconds | 8.6 seconds |
| Drive Type | Front | Rear |
| Transmission Type | Manual | Automatic |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 5 doors | 4 doors |
| Vehicle Weight | 915 kg | 1715 kg |
| Vehicle Length | 3540 mm | 4860 mm |
| Vehicle Width | 1600 mm | 1830 mm |
| Vehicle Height | 1550 mm | 1490 mm |
| Wheelbase Size | 2310 mm | 2860 mm |
| Fuel Consumption Overall | 5.7 L/100km | 6.9 L/100km |
| Fuel Tank Capacity | 35 L | 65 L |
