2010 Ford Ranger vs. 2012 Chevrolet Traverse
To start off, 2012 Chevrolet Traverse is newer by 2 year(s). Which means there will be less support and parts availability for 2010 Ford Ranger. In addition, the cost of maintenance, including insurance, on 2010 Ford Ranger would be higher. At 3,600 cc (6 cylinders), 2012 Chevrolet Traverse is equipped with a bigger engine. In terms of performance, 2012 Chevrolet Traverse (281 HP @ 6300 RPM) has 138 more horse power than 2010 Ford Ranger. (143 HP @ 5250 RPM) In normal driving conditions, 2012 Chevrolet Traverse should accelerate faster than 2010 Ford Ranger. With that said, vehicle weight also plays an important factor in acceleration. 2012 Chevrolet Traverse weights approximately 666 kg more than 2010 Ford Ranger. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Because 2010 Ford Ranger is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2010 Ford Ranger. However, in wet, icy, snow, or gravel driving conditions, 2012 Chevrolet Traverse, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2012 Chevrolet Traverse (360 Nm @ 3400 RPM) has 151 more torque (in Nm) than 2010 Ford Ranger. (209 Nm @ 3750 RPM). This means 2012 Chevrolet Traverse will have an easier job in driving up hills or pulling heavy equipment than 2010 Ford Ranger. 2012 Chevrolet Traverse has automatic transmission and 2010 Ford Ranger has manual transmission. 2010 Ford Ranger will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2012 Chevrolet Traverse will be easier to drive especially in heavy traffic.
Compare all specifications:
2010 Ford Ranger | 2012 Chevrolet Traverse | |
Make | Ford | Chevrolet |
Model | Ranger | Traverse |
Year Released | 2010 | 2012 |
Body Type | Pickup | Crossover |
Engine Position | Front | Front |
Engine Size | 2300 cc | 3600 cc |
Engine Cylinders | 4 cylinders | 6 cylinders |
Engine Type | in-line | V |
Valves per Cylinder | 4 valves | 4 valves |
Horse Power | 143 HP | 281 HP |
Engine RPM | 5250 RPM | 6300 RPM |
Torque | 209 Nm | 360 Nm |
Torque RPM | 3750 RPM | 3400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | Front |
Transmission Type | Manual | 6-speed shiftable automatic |
Number of Doors | 2 doors | 5 doors |
Vehicle Weight | 1447 kg | 2113 kg |
Vehicle Length | 5171 mm | 5207 mm |
Vehicle Width | 1763 mm | 1991 mm |
Vehicle Height | 1684 mm | 1849 mm |
Wheelbase Size | 3193 mm | 3020 mm |
Fuel Consumption | 8.7 L/100km | 9.8 L/100km |
Fuel Consumption City | 10.7 L/100km | 13.8 L/100km |
Fuel Tank Capacity | 74 L | 83 L |