Fit Note: |
Kit Used to convert mechanical camshaft chain tensioners to oil pressure feed type. May require 2, 930 105 513 00 tensioner spacer. Prior to installation, remove the safety pin from the tensioner, hold tensioner in a bucket with oil and pump the piston until no air comes out. When installed there could be still some air in the oil line leading to the tensioner. Therefore, steps should be taken that the engine does not start when starter motor is turning. Remove the main ignition cable or pull the plug of the fuel pump relay to stop the engine from starting up. Turn the engine over pumping oil through the system and air out of the lines. |