1942 DKW Reichklasse F8 vs. 1995 Mazda MX-3

To start off, 1995 Mazda MX-3 is newer by 53 year(s). Which means there will be less support and parts availability for 1942 DKW Reichklasse F8. In addition, the cost of maintenance, including insurance, on 1942 DKW Reichklasse F8 would be higher. At 1,598 cc (4 cylinders), 1995 Mazda MX-3 is equipped with a bigger engine. In terms of performance, 1995 Mazda MX-3 (106 HP @ 6200 RPM) has 88 more horse power than 1942 DKW Reichklasse F8. (18 HP @ 3500 RPM) In normal driving conditions, 1995 Mazda MX-3 should accelerate faster than 1942 DKW Reichklasse F8. With that said, vehicle weight also plays an important factor in acceleration. 1995 Mazda MX-3 weights approximately 224 kg more than 1942 DKW Reichklasse F8. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are front wheel drive (FWD). Which offers better traction when its slippery than rear wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1995 Mazda MX-3 (134 Nm @ 3600 RPM) has 85 more torque (in Nm) than 1942 DKW Reichklasse F8. (49 Nm @ 2500 RPM). This means 1995 Mazda MX-3 will have an easier job in driving up hills or pulling heavy equipment than 1942 DKW Reichklasse F8.

Compare all specifications:

1942 DKW Reichklasse F8 1995 Mazda MX-3
Make DKW Mazda
Model Reichklasse F8 MX-3
Year Released 1942 1995
Engine Size 584 cc 1598 cc
Engine Cylinders 2 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 18 HP 106 HP
Engine RPM 3500 RPM 6200 RPM
Torque 49 Nm 134 Nm
Torque RPM 2500 RPM 3600 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Front
Transmission Type Manual Manual
Vehicle Weight 835 kg 1059 kg
Vehicle Length 3900 mm 4230 mm
Vehicle Width 1490 mm 1700 mm
Vehicle Height 1510 mm 1320 mm
Wheelbase Size 2620 mm 2460 mm