1945 Citroen 7A vs. 2005 Ford Shelby GR-1 Concept

To start off, 2005 Ford Shelby GR-1 Concept is newer by 60 year(s). Which means there will be less support and parts availability for 1945 Citroen 7A. In addition, the cost of maintenance, including insurance, on 1945 Citroen 7A would be higher. At 6,392 cc (10 cylinders), 2005 Ford Shelby GR-1 Concept is equipped with a bigger engine. In terms of performance, 2005 Ford Shelby GR-1 Concept (605 HP @ 6750 RPM) has 570 more horse power than 1945 Citroen 7A. (35 HP @ 3200 RPM) In normal driving conditions, 2005 Ford Shelby GR-1 Concept should accelerate faster than 1945 Citroen 7A. With that said, vehicle weight also plays an important factor in acceleration. 2005 Ford Shelby GR-1 Concept weights approximately 869 kg more than 1945 Citroen 7A. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 2005 Ford Shelby GR-1 Concept is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 2005 Ford Shelby GR-1 Concept. However, in wet, icy, snow, or gravel driving conditions, 1945 Citroen 7A, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.

Compare all specifications:

1945 Citroen 7A 2005 Ford Shelby GR-1 Concept
Make Citroen Ford
Model 7A Shelby GR-1 Concept
Year Released 1945 2005
Engine Position Front Front
Engine Size 1529 cc 6392 cc
Engine Cylinders 4 cylinders 10 cylinders
Engine Type in-line V
Valves per Cylinder 2 valves 4 valves
Horse Power 35 HP 605 HP
Engine RPM 3200 RPM 6750 RPM
Fuel Type Gasoline Gasoline
Drive Type Front Rear
Transmission Type Manual Manual
Number of Seats 5 seats 2 seats
Vehicle Weight 900 kg 1769 kg
Vehicle Length 4460 mm 4420 mm
Vehicle Width 1630 mm 1900 mm
Vehicle Height 1530 mm 1170 mm
Wheelbase Size 2920 mm 2550 mm