1946 Allard J1 vs. 1952 MG TD

To start off, 1952 MG TD is newer by 6 year(s). Which means there will be less support and parts availability for 1946 Allard J1. In addition, the cost of maintenance, including insurance, on 1946 Allard J1 would be higher. At 3,917 cc (8 cylinders), 1946 Allard J1 is equipped with a bigger engine. In terms of performance, 1946 Allard J1 (100 HP @ 3800 RPM) has 41 more horse power than 1952 MG TD. (59 HP @ 5500 RPM). In normal driving conditions, 1946 Allard J1 should accelerate faster than 1952 MG TD. With that said, vehicle weight also plays an important factor in acceleration. 1946 Allard J1 weights approximately 265 kg more than 1952 MG TD. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1946 Allard J1 (305 Nm @ 2500 RPM) has 218 more torque (in Nm) than 1952 MG TD. (87 Nm @ 2600 RPM). This means 1946 Allard J1 will have an easier job in driving up hills or pulling heavy equipment than 1952 MG TD.

Compare all specifications:

1946 Allard J1 1952 MG TD
Make Allard MG
Model J1 TD
Year Released 1946 1952
Engine Position Front Front
Engine Size 3917 cc 1250 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 100 HP 59 HP
Engine RPM 3800 RPM 5500 RPM
Torque 305 Nm 87 Nm
Torque RPM 2500 RPM 2600 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Number of Seats 2 seats 2 seats
Number of Doors 2 doors 2 doors
Vehicle Weight 1140 kg 875 kg
Vehicle Length 3690 mm 3690 mm
Vehicle Width 1480 mm 1490 mm
Vehicle Height 1510 mm 1350 mm
Wheelbase Size 2440 mm 2390 mm