1946 Allard J1 vs. 1983 Bitter SC

To start off, 1983 Bitter SC is newer by 37 year(s). Which means there will be less support and parts availability for 1946 Allard J1. In addition, the cost of maintenance, including insurance, on 1946 Allard J1 would be higher. At 3,622 cc (8 cylinders), 1946 Allard J1 is equipped with a bigger engine. In terms of performance, 1983 Bitter SC (178 HP @ 5800 RPM) has 93 more horse power than 1946 Allard J1. (85 HP @ 3800 RPM) In normal driving conditions, 1983 Bitter SC should accelerate faster than 1946 Allard J1. With that said, vehicle weight also plays an important factor in acceleration. 1983 Bitter SC weights approximately 580 kg more than 1946 Allard J1. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1983 Bitter SC (248 Nm @ 4500 RPM) has 45 more torque (in Nm) than 1946 Allard J1. (203 Nm @ 1500 RPM). This means 1983 Bitter SC will have an easier job in driving up hills or pulling heavy equipment than 1946 Allard J1.

Compare all specifications:

1946 Allard J1 1983 Bitter SC
Make Allard Bitter
Model J1 SC
Year Released 1946 1983
Engine Position Front Front
Engine Size 3622 cc 2968 cc
Engine Cylinders 8 cylinders 6 cylinders
Engine Type in-line in-line
Horse Power 85 HP 178 HP
Engine RPM 3800 RPM 5800 RPM
Torque 203 Nm 248 Nm
Torque RPM 1500 RPM 4500 RPM
Engine Compression Ratio 7.5:1 9.4:1
Fuel Type Gasoline Gasoline
Drive Type Rear Rear
Vehicle Weight 1020 kg 1600 kg
Vehicle Length 3690 mm 4920 mm
Vehicle Width 1480 mm 1830 mm
Vehicle Height 1510 mm 1360 mm
Wheelbase Size 2440 mm 2690 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]