1946 Allard J1 vs. 2003 Mazda 3

To start off, 2003 Mazda 3 is newer by 57 year(s). Which means there will be less support and parts availability for 1946 Allard J1. In addition, the cost of maintenance, including insurance, on 1946 Allard J1 would be higher. At 3,622 cc (8 cylinders), 1946 Allard J1 is equipped with a bigger engine. In terms of performance, 2003 Mazda 3 (160 HP @ 6000 RPM) has 75 more horse power than 1946 Allard J1. (85 HP @ 3800 RPM) In normal driving conditions, 2003 Mazda 3 should accelerate faster than 1946 Allard J1. With that said, vehicle weight also plays an important factor in acceleration. 2003 Mazda 3 weights approximately 220 kg more than 1946 Allard J1. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1946 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1946 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 2003 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1946 Allard J1 (203 Nm @ 1500 RPM) has 8 more torque (in Nm) than 2003 Mazda 3. (195 Nm @ 4500 RPM). This means 1946 Allard J1 will have an easier job in driving up hills or pulling heavy equipment than 2003 Mazda 3. 2003 Mazda 3 has automatic transmission and 1946 Allard J1 has manual transmission. 1946 Allard J1 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2003 Mazda 3 will be easier to drive especially in heavy traffic.

Compare all specifications:

1946 Allard J1 2003 Mazda 3
Make Allard Mazda
Model J1 3
Year Released 1946 2003
Engine Position Front Front
Engine Size 3622 cc 1999 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 85 HP 160 HP
Engine RPM 3800 RPM 6000 RPM
Torque 203 Nm 195 Nm
Torque RPM 1500 RPM 4500 RPM
Engine Compression Ratio 7.5:1 11.0:1
Fuel Type Gasoline Gasoline
Top Speed 132 km/hour 200 km/hour
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Doors 2 doors 3 doors
Vehicle Weight 1020 kg 1240 kg
Vehicle Length 3690 mm 4430 mm
Vehicle Width 1480 mm 1760 mm
Vehicle Height 1510 mm 1470 mm
Wheelbase Size 2440 mm 2850 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]