1946 Allard J1 vs. 2006 Chevrolet HHR

To start off, 2006 Chevrolet HHR is newer by 60 year(s). Which means there will be less support and parts availability for 1946 Allard J1. In addition, the cost of maintenance, including insurance, on 1946 Allard J1 would be higher. At 3,622 cc (8 cylinders), 1946 Allard J1 is equipped with a bigger engine.

Because 1946 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1946 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 2006 Chevrolet HHR, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 203 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles. 2006 Chevrolet HHR has automatic transmission and 1946 Allard J1 has manual transmission. 1946 Allard J1 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 2006 Chevrolet HHR will be easier to drive especially in heavy traffic.

Compare all specifications:

1946 Allard J1 2006 Chevrolet HHR
Make Allard Chevrolet
Model J1 HHR
Year Released 1946 2006
Engine Position Front Front
Engine Size 3622 cc 2199 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 85 HP 0 HP
Torque 203 Nm 203 Nm
Torque RPM 1500 RPM 4000 RPM
Engine Compression Ratio 7.5:1 10.0:1
Drive Type Rear Front
Transmission Type Manual Automatic
Number of Doors 2 doors 4 doors
Vehicle Length 3690 mm 4440 mm
Vehicle Width 1480 mm 1740 mm
Vehicle Height 1510 mm 1570 mm
Wheelbase Size 2440 mm 2630 mm