1946 Allard J1 vs. 2008 Mazda 3
To start off, 2008 Mazda 3 is newer by 62 year(s). Which means there will be less support and parts availability for 1946 Allard J1. In addition, the cost of maintenance, including insurance, on 1946 Allard J1 would be higher. At 3,622 cc (8 cylinders), 1946 Allard J1 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 2008 Mazda 3 weights approximately 160 kg more than 1946 Allard J1.
Because 1946 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1946 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1946 Allard J1 (203 Nm @ 1500 RPM) has 57 more torque (in Nm) than 2008 Mazda 3. (146 Nm @ 4000 RPM). This means 1946 Allard J1 will have an easier job in driving up hills or pulling heavy equipment than 2008 Mazda 3.
Compare all specifications:
1946 Allard J1 | 2008 Mazda 3 | |
Make | Allard | Mazda |
Model | J1 | 3 |
Year Released | 1946 | 2008 |
Engine Position | Front | Front |
Engine Size | 3622 cc | 1597 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 4 valves |
Horse Power | 85 HP | 0 HP |
Torque | 203 Nm | 146 Nm |
Torque RPM | 1500 RPM | 4000 RPM |
Engine Compression Ratio | 7.5:1 | 10.0:1 |
Fuel Type | Gasoline | Gasoline |
Top Speed | 132 km/hour | 183 km/hour |
Drive Type | Rear | Front |
Transmission Type | Manual | Manual |
Number of Doors | 2 doors | 4 doors |
Vehicle Weight | 1020 kg | 1180 kg |
Vehicle Length | 3690 mm | 4500 mm |
Vehicle Width | 1480 mm | 1760 mm |
Vehicle Height | 1510 mm | 1470 mm |
Wheelbase Size | 2440 mm | 2650 mm |