1946 Austin 16 vs. 2008 Toyota Corolla

To start off, 2008 Toyota Corolla is newer by 62 year(s). Which means there will be less support and parts availability for 1946 Austin 16. In addition, the cost of maintenance, including insurance, on 1946 Austin 16 would be higher. At 2,200 cc (4 cylinders), 1946 Austin 16 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1946 Austin 16 weights approximately 155 kg more than 2008 Toyota Corolla.

Because 1946 Austin 16 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1946 Austin 16. However, in wet, icy, snow, or gravel driving conditions, 2008 Toyota Corolla, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 146 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.

Compare all specifications:

1946 Austin 16 2008 Toyota Corolla
Make Austin Toyota
Model 16 Corolla
Year Released 1946 2008
Engine Position Front Front
Engine Size 2200 cc 1598 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 63 HP 0 HP
Torque 146 Nm 146 Nm
Torque RPM 2200 RPM 4400 RPM
Engine Bore Size 79.4 mm 79.1 mm
Engine Stroke Size 111.1 mm 81.5 mm
Engine Compression Ratio 6.8:1 10.5:1
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 4 doors
Vehicle Weight 1280 kg 1125 kg
Vehicle Length 4350 mm 4400 mm
Vehicle Width 1710 mm 1700 mm
Vehicle Height 1690 mm 1480 mm
Wheelbase Size 2660 mm 2610 mm
Fuel Tank Capacity 63 L 60 L