1946 Bentley Mark VI vs. 1977 Fiat 132
To start off, 1977 Fiat 132 is newer by 31 year(s). Which means there will be less support and parts availability for 1946 Bentley Mark VI. In addition, the cost of maintenance, including insurance, on 1946 Bentley Mark VI would be higher. At 4,566 cc (6 cylinders), 1946 Bentley Mark VI is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1946 Bentley Mark VI weights approximately 624 kg more than 1977 Fiat 132.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1946 Bentley Mark VI | 1977 Fiat 132 | |
Make | Bentley | Fiat |
Model | Mark VI | 132 |
Year Released | 1946 | 1977 |
Engine Position | Front | Front |
Engine Size | 4566 cc | 2445 cc |
Engine Cylinders | 6 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 0 HP | 71 HP |
Engine Bore Size | 92 mm | 93 mm |
Engine Stroke Size | 114.3 mm | 90 mm |
Engine Compression Ratio | 6.4:1 | 22.0:1 |
Fuel Type | Gasoline | Diesel |
Top Speed | 161 km/hour | 150 km/hour |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 5 seats | 5 seats |
Number of Doors | 4 doors | 4 doors |
Vehicle Weight | 1854 kg | 1230 kg |
Vehicle Length | 4880 mm | 4400 mm |
Vehicle Width | 1760 mm | 1650 mm |
Vehicle Height | 1640 mm | 1440 mm |
Wheelbase Size | 3050 mm | 2500 mm |
Fuel Tank Capacity | 81 L | 56 L |