1946 GAZ M-20 vs. 2011 Mitsubishi Lancer
To start off, 2011 Mitsubishi Lancer is newer by 65 year(s). Which means there will be less support and parts availability for 1946 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1946 GAZ M-20 would be higher. At 2,120 cc (4 cylinders), 1946 GAZ M-20 is equipped with a bigger engine. In terms of performance, 2011 Mitsubishi Lancer (148 HP @ 6000 RPM) has 97 more horse power than 1946 GAZ M-20. (51 HP @ 3600 RPM) In normal driving conditions, 2011 Mitsubishi Lancer should accelerate faster than 1946 GAZ M-20.
Because 1946 GAZ M-20 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1946 GAZ M-20. However, in wet, icy, snow, or gravel driving conditions, 2011 Mitsubishi Lancer, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 2011 Mitsubishi Lancer (196 Nm @ 4200 RPM) has 71 more torque (in Nm) than 1946 GAZ M-20. (125 Nm @ 2200 RPM). This means 2011 Mitsubishi Lancer will have an easier job in driving up hills or pulling heavy equipment than 1946 GAZ M-20.
Compare all specifications:
| 1946 GAZ M-20 | 2011 Mitsubishi Lancer | |
| Make | GAZ | Mitsubishi |
| Model | M-20 | Lancer |
| Year Released | 1946 | 2011 |
| Engine Size | 2120 cc | 2000 cc |
| Engine Cylinders | 4 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Valves per Cylinder | 2 valves | 4 valves |
| Horse Power | 51 HP | 148 HP |
| Engine RPM | 3600 RPM | 6000 RPM |
| Torque | 125 Nm | 196 Nm |
| Torque RPM | 2200 RPM | 4200 RPM |
| Fuel Type | Gasoline | Gasoline |
| Drive Type | Rear | Front |
| Transmission Type | Manual | Manual |
| Vehicle Length | 4670 mm | 4582 mm |
| Vehicle Width | 1900 mm | 1763 mm |
| Vehicle Height | 1650 mm | 1516 mm |
| Wheelbase Size | 2710 mm | 2634 mm |
