1946 GAZ M-20 vs. 2012 Ford Bantam

To start off, 2012 Ford Bantam is newer by 66 year(s). Which means there will be less support and parts availability for 1946 GAZ M-20. In addition, the cost of maintenance, including insurance, on 1946 GAZ M-20 would be higher. At 2,120 cc (4 cylinders), 1946 GAZ M-20 is equipped with a bigger engine. In terms of performance, 2012 Ford Bantam (74 HP) has 23 more horse power than 1946 GAZ M-20. (51 HP) In normal driving conditions, 2012 Ford Bantam should accelerate faster than 1946 GAZ M-20. With that said, vehicle weight also plays an important factor in acceleration. 1946 GAZ M-20 weights approximately 440 kg more than 2012 Ford Bantam.

Because 1946 GAZ M-20 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1946 GAZ M-20. However, in wet, icy, snow, or gravel driving conditions, 2012 Ford Bantam, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1946 GAZ M-20 (125 Nm @ 2200 RPM) has 15 more torque (in Nm) than 2012 Ford Bantam. (110 Nm @ 3000 RPM). This means 1946 GAZ M-20 will have an easier job in driving up hills or pulling heavy equipment than 2012 Ford Bantam.

Compare all specifications:

1946 GAZ M-20 2012 Ford Bantam
Make GAZ Ford
Model M-20 Bantam
Year Released 1946 2012
Engine Size 2120 cc 1295 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 2 valves
Horse Power 51 HP 74 HP
Torque 125 Nm 110 Nm
Torque RPM 2200 RPM 3000 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 1460 kg 1020 kg
Vehicle Length 4670 mm 4280 mm
Vehicle Width 1900 mm 1470 mm
Vehicle Height 1650 mm 1640 mm
Wheelbase Size 2710 mm 2670 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]