1946 Jeep CJ2A vs. 1976 Lada 1200
To start off, 1976 Lada 1200 is newer by 30 year(s). Which means there will be less support and parts availability for 1946 Jeep CJ2A. In addition, the cost of maintenance, including insurance, on 1946 Jeep CJ2A would be higher. At 2,199 cc (4 cylinders), 1946 Jeep CJ2A is equipped with a bigger engine. In terms of performance, both vehicles can yield 59 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1946 Jeep CJ2A weights approximately 162 kg more than 1976 Lada 1200.
Because 1946 Jeep CJ2A is four wheel drive (4WD), it will have significant more traction and grip than 1976 Lada 1200. In wet, icy, snow, or gravel driving conditions, 1946 Jeep CJ2A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1946 Jeep CJ2A (145 Nm @ 3600 RPM) has 58 more torque (in Nm) than 1976 Lada 1200. (87 Nm @ 3400 RPM). This means 1946 Jeep CJ2A will have an easier job in driving up hills or pulling heavy equipment than 1976 Lada 1200.
Compare all specifications:
1946 Jeep CJ2A | 1976 Lada 1200 | |
Make | Jeep | Lada |
Model | CJ2A | 1200 |
Year Released | 1946 | 1976 |
Body Type | SUV | Sedan |
Engine Position | Front | Front |
Engine Size | 2199 cc | 1198 cc |
Engine Cylinders | 4 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 59 HP | 59 HP |
Engine RPM | 3600 RPM | 5600 RPM |
Torque | 145 Nm | 87 Nm |
Torque RPM | 3600 RPM | 3400 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | 4WD | Rear |
Transmission Type | Manual | Manual |
Vehicle Weight | 1110 kg | 948 kg |
Vehicle Length | 3130 mm | 4080 mm |
Vehicle Width | 1460 mm | 1620 mm |
Vehicle Height | 1630 mm | 1450 mm |
Wheelbase Size | 2040 mm | 2430 mm |