1947 Allard J1 vs. 1980 Ford Laser

To start off, 1980 Ford Laser is newer by 33 year(s). Which means there will be less support and parts availability for 1947 Allard J1. In addition, the cost of maintenance, including insurance, on 1947 Allard J1 would be higher. At 3,620 cc (8 cylinders), 1947 Allard J1 is equipped with a bigger engine. In terms of performance, both vehicles can yield 85 horse power. So under normal driving conditions, the acceleration of both vehicles should be relatively similar. With that said, vehicle weight also plays an important factor in acceleration. 1947 Allard J1 weights approximately 230 kg more than 1980 Ford Laser.

Because 1947 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1947 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 1980 Ford Laser, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1947 Allard J1 (203 Nm @ 1500 RPM) has 83 more torque (in Nm) than 1980 Ford Laser. (120 Nm @ 3500 RPM). This means 1947 Allard J1 will have an easier job in driving up hills or pulling heavy equipment than 1980 Ford Laser.

Compare all specifications:

1947 Allard J1 1980 Ford Laser
Make Allard Ford
Model J1 Laser
Year Released 1947 1980
Engine Position Front Front
Engine Size 3620 cc 1490 cc
Engine Cylinders 8 cylinders 4 cylinders
Engine Type in-line in-line
Horse Power 85 HP 85 HP
Engine RPM 3800 RPM 5500 RPM
Torque 203 Nm 120 Nm
Torque RPM 1500 RPM 3500 RPM
Fuel Type Gasoline Gasoline
Drive Type Rear Front
Transmission Type Manual Manual
Vehicle Weight 1020 kg 790 kg
Vehicle Length 3690 mm 3960 mm
Vehicle Width 1480 mm 1640 mm
Vehicle Height 1510 mm 1380 mm
Wheelbase Size 2440 mm 2370 mm


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]