1947 Allard J1 vs. 1996 Buick Skylark

To start off, 1996 Buick Skylark is newer by 49 year(s). Which means there will be less support and parts availability for 1947 Allard J1. In addition, the cost of maintenance, including insurance, on 1947 Allard J1 would be higher. At 3,620 cc (8 cylinders), 1947 Allard J1 is equipped with a bigger engine. In terms of performance, 1996 Buick Skylark (155 HP @ 5200 RPM) has 70 more horse power than 1947 Allard J1. (85 HP @ 3800 RPM) In normal driving conditions, 1996 Buick Skylark should accelerate faster than 1947 Allard J1. With that said, vehicle weight also plays an important factor in acceleration. 1996 Buick Skylark weights approximately 303 kg more than 1947 Allard J1. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.

Because 1947 Allard J1 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1947 Allard J1. However, in wet, icy, snow, or gravel driving conditions, 1996 Buick Skylark, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1996 Buick Skylark (252 Nm @ 4000 RPM) has 49 more torque (in Nm) than 1947 Allard J1. (203 Nm @ 1500 RPM). This means 1996 Buick Skylark will have an easier job in driving up hills or pulling heavy equipment than 1947 Allard J1. 1996 Buick Skylark has automatic transmission and 1947 Allard J1 has manual transmission. 1947 Allard J1 will offer better control over acceleration and deceleration in addition to better fuel efficiency overall. 1996 Buick Skylark will be easier to drive especially in heavy traffic.

Compare all specifications: