1947 Allard K1 vs. 1947 Jeep CJ2A
To start off, both 1947 Allard K1 and 1947 Jeep CJ2A were released in the same year (1947). Therefore the support and the availability on parts for both vehicles should be relatively similar. At 3,622 cc (8 cylinders), 1947 Allard K1 is equipped with a bigger engine. In terms of performance, 1947 Allard K1 (85 HP @ 3800 RPM) has 26 more horse power than 1947 Jeep CJ2A. (59 HP @ 3600 RPM). In normal driving conditions, 1947 Allard K1 should accelerate faster than 1947 Jeep CJ2A. With that said, vehicle weight also plays an important factor in acceleration. 1947 Jeep CJ2A weights approximately 43 kg more than 1947 Allard K1.
Because 1947 Jeep CJ2A is four wheel drive (4WD), it will have significant more traction and grip than 1947 Allard K1. In wet, icy, snow, or gravel driving conditions, 1947 Jeep CJ2A will offer significantly more control. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, 1947 Allard K1 (203 Nm @ 1500 RPM) has 58 more torque (in Nm) than 1947 Jeep CJ2A. (145 Nm @ 3600 RPM). This means 1947 Allard K1 will have an easier job in driving up hills or pulling heavy equipment than 1947 Jeep CJ2A.
Compare all specifications:
1947 Allard K1 | 1947 Jeep CJ2A | |
Make | Allard | Jeep |
Model | K1 | CJ2A |
Year Released | 1947 | 1947 |
Engine Position | Front | Front |
Engine Size | 3622 cc | 2199 cc |
Engine Cylinders | 8 cylinders | 4 cylinders |
Engine Type | in-line | in-line |
Valves per Cylinder | 2 valves | 2 valves |
Horse Power | 85 HP | 59 HP |
Engine RPM | 3800 RPM | 3600 RPM |
Torque | 203 Nm | 145 Nm |
Torque RPM | 1500 RPM | 3600 RPM |
Fuel Type | Gasoline | Gasoline |
Drive Type | Rear | 4WD |
Transmission Type | Manual | Manual |
Vehicle Weight | 1067 kg | 1110 kg |
Vehicle Length | 4270 mm | 3130 mm |
Vehicle Width | 1810 mm | 1460 mm |
Vehicle Height | 1520 mm | 1630 mm |
Wheelbase Size | 2700 mm | 2040 mm |