1947 Austin 16 vs. 2008 Mazda 3

To start off, 2008 Mazda 3 is newer by 61 year(s). Which means there will be less support and parts availability for 1947 Austin 16. In addition, the cost of maintenance, including insurance, on 1947 Austin 16 would be higher. At 2,200 cc (4 cylinders), 1947 Austin 16 is equipped with a bigger engine. With that said, vehicle weight also plays an important factor in acceleration. 1947 Austin 16 weights approximately 78 kg more than 2008 Mazda 3.

Because 1947 Austin 16 is rear wheel drive (RWD), it offers better handling in dry conditions; in addition, if you are looking to drift, it will be much easier to do with 1947 Austin 16. However, in wet, icy, snow, or gravel driving conditions, 2008 Mazda 3, being front wheel drive (FWD), will offer much better control with better grip. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control. Let's talk about torque, both vehicles can yield 146 Nm of torque. So under normal driving conditions, the ability to climb up hills and pull heavy equipment should be relatively similar for both vehicles.

Compare all specifications:

1947 Austin 16 2008 Mazda 3
Make Austin Mazda
Model 16 3
Year Released 1947 2008
Engine Position Front Front
Engine Size 2200 cc 1598 cc
Engine Cylinders 4 cylinders 4 cylinders
Engine Type in-line in-line
Valves per Cylinder 2 valves 4 valves
Horse Power 63 HP 0 HP
Torque 146 Nm 146 Nm
Torque RPM 2200 RPM 4000 RPM
Engine Bore Size 79.4 mm 78 mm
Engine Stroke Size 111.1 mm 83.6 mm
Engine Compression Ratio 6.8:1 10.0:1
Fuel Type Gasoline Gasoline
Top Speed 121 km/hour 178 km/hour
Drive Type Rear Front
Transmission Type Manual Manual
Number of Seats 5 seats 5 seats
Number of Doors 4 doors 5 doors
Vehicle Weight 1280 kg 1202 kg
Vehicle Length 4350 mm 4430 mm
Vehicle Width 1710 mm 1760 mm
Vehicle Height 1680 mm 1470 mm
Wheelbase Size 2660 mm 2650 mm
Fuel Tank Capacity 63 L 55 L


 

More Comparisons

Resources

Replacing Your Front Disc Brakes Made Simple: The Definitive DIY Guide
Replace the front disc brakes of your vehicle and save money on labour cost. Read this guide to learn how. [read more]
What to look for when buying a used/second hand car.
Diligence through every step of the buying process will help you find a reliable used car and avoid any unpleasant surprises. [read more]
Step-by-Step Guide on How to Perform an Oil Change on Your Car
One of the most effective ways of saving money on car maintenance is to change the oil yourself. [read more]