1947 Austin A 125 vs. 1959 Mercedes-Benz 220
To start off, 1959 Mercedes-Benz 220 is newer by 12 year(s). Which means there will be less support and parts availability for 1947 Austin A 125. In addition, the cost of maintenance, including insurance, on 1947 Austin A 125 would be higher. At 3,990 cc (6 cylinders), 1947 Austin A 125 is equipped with a bigger engine. In terms of performance, 1947 Austin A 125 (125 HP) has 7 more horse power than 1959 Mercedes-Benz 220. (118 HP). In normal driving conditions, 1947 Austin A 125 should accelerate faster than 1959 Mercedes-Benz 220. With that said, vehicle weight also plays an important factor in acceleration. 1947 Austin A 125 weights approximately 760 kg more than 1959 Mercedes-Benz 220. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
1947 Austin A 125 | 1959 Mercedes-Benz 220 | |
Make | Austin | Mercedes-Benz |
Model | A 125 | 220 |
Year Released | 1947 | 1959 |
Engine Position | Front | Front |
Engine Size | 3990 cc | 2195 cc |
Engine Cylinders | 6 cylinders | 6 cylinders |
Engine Type | in-line | in-line |
Horse Power | 125 HP | 118 HP |
Engine Compression Ratio | 6.8:1 | 8.7:1 |
Drive Type | Rear | Rear |
Transmission Type | Manual | Manual |
Number of Seats | 7 seats | 5 seats |
Number of Doors | 4 doors | 2 doors |
Vehicle Weight | 2060 kg | 1300 kg |
Vehicle Length | 5200 mm | 4710 mm |
Vehicle Width | 1860 mm | 1800 mm |
Wheelbase Size | 3360 mm | 2710 mm |