1947 Austin A 125 vs. 1965 Simca 1000
To start off, 1965 Simca 1000 is newer by 18 year(s). Which means there will be less support and parts availability for 1947 Austin A 125. In addition, the cost of maintenance, including insurance, on 1947 Austin A 125 would be higher. At 3,990 cc (6 cylinders), 1947 Austin A 125 is equipped with a bigger engine. In terms of performance, 1947 Austin A 125 (125 HP) has 74 more horse power than 1965 Simca 1000. (51 HP). In normal driving conditions, 1947 Austin A 125 should accelerate faster than 1965 Simca 1000. With that said, vehicle weight also plays an important factor in acceleration. 1947 Austin A 125 weights approximately 1270 kg more than 1965 Simca 1000. So despite on having greater horse power, its additional weight may have an impact towards its acceleration in comparison.
Both vehicles are rear wheel drive (RWD) - it offers better handling in dry conditions; in addition, if you are looking to drift, both vehicles do the job better than front wheel drive vehicles. With that said, do keep in mind that many other factors such as speed and the wear on your tires can also have significant impact on traction and control.
Compare all specifications:
| 1947 Austin A 125 | 1965 Simca 1000 | |
| Make | Austin | Simca |
| Model | A 125 | 1000 |
| Year Released | 1947 | 1965 |
| Engine Position | Front | Rear |
| Engine Size | 3990 cc | 944 cc |
| Engine Cylinders | 6 cylinders | 4 cylinders |
| Engine Type | in-line | in-line |
| Horse Power | 125 HP | 51 HP |
| Engine Bore Size | 87.3 mm | 68 mm |
| Engine Stroke Size | 111.1 mm | 65 mm |
| Engine Compression Ratio | 6.8:1 | 8.2:1 |
| Drive Type | Rear | Rear |
| Number of Seats | 5 seats | 5 seats |
| Number of Doors | 4 doors | 4 doors |
| Vehicle Weight | 2000 kg | 730 kg |
| Vehicle Length | 4880 mm | 3930 mm |
| Vehicle Width | 1860 mm | 1530 mm |
| Vehicle Height | 1710 mm | 1260 mm |
| Wheelbase Size | 3030 mm | 2230 mm |
